-
十余年實力沉淀 專注流體設備主營
視覺點膠機
食品裱花機
視覺點鉆機
視覺點漆機
視覺點膠機
食品裱花機
視覺點鉆機
視覺點漆機
經大數據統計，總結近期全自動點膠機經常遇見的故障問題！
柏銳智能科技有限公司從08年成立，至今發展已經有10多年的歷史，在點膠行業已有一定的地位。在近年來，柏銳的點膠軟件不斷升級，性能已經越來越好了，但是在實際的操作中，難免還是會出現一些故障，下面柏銳就總結下，全自動點膠機常見問題：
Founded in 2008, Bairui Intelligent Technology Co., Ltd. has a history of more than 10 years and has a certain position in the dispensing industry. In recent years, Bai Rui's dispensing software has been continuously upgraded, and its performance has become better and better. However, in actual operation, it is inevitable that some faults will occur. Below, Bai Rui will summarize the common problems of automatic dispensing machines:
問題一：機器點膠重復，每次點膠時會點2次
Problem 1: The machine dispenses repeatedly, it will be 2 times each time the glue is dispensed.
問題二：點珠機有時候吸不上珠子或者打不準
Question 2: The beading machine sometimes cannot attract beads or is inaccurate
問題三：點膠超行程
Question 3: Dispensing overtravel
問題四：線位器老化
Question 4: Positioner aging
以上就是我們近期所收到的客戶的反應問題，收到問題我們第一時間就派出相關人員進行調查。經過我們技術人員的分析處理，這些問題因?yàn)榭腿说牟僮鞒霈F(xiàn)了問題，對機器進行程序編碼、修改下機器的參數即可。不過全自動點膠機的老化問題，就需要更換設備零件。
The above is the response of the customer we have received recently. When we receive the problem, we will send the relevant personnel to investigate. After the analysis and processing by our technicians, these problems can be caused by the operation of the guest, coding the machine, and modifying the parameters of the machine. However, if the automatic dispenser is aging, it is necessary to replace the parts of the equipment.
我們的機器對環境也是有些要求，雖然我們的機器設備采用進口材料，質量都有保障。但是如果點膠機所處的環境過于惡劣，會減少機器的使用壽命，所以客人購買了點膠機，要好好遵守點膠機的保養要求。
Our machines also have some requirements for the environment. Although our machines and equipment use imported materials, the quality is guaranteed. However, if the environment in which the dispenser is located is too harsh, the service life of the machine will be reduced. Therefore, if the customer purchases the dispenser, it is necessary to comply with the maintenance requirements of the dispenser.
作為源頭廠家，我們會第一時間去幫客戶解決問題，讓客人滿意是我們的宗旨。如果您有點膠點鉆、噴漆、上色等方面的需求，歡迎您與我司進行溝通。
As the source manufacturer, we will help customers solve problems in the first time, so that customer satisfaction is our aim. If you have a little bit of need for dot drilling, painting, coloring, etc., you are welcome to communicate with us.
