-
十余年實力沉淀 專注流體設備主營
視覺點膠機
食品裱花機
視覺點鉆機
視覺點漆機
視覺點膠機
食品裱花機
視覺點鉆機
視覺點漆機
專業點膠廠家對客戶點膠點鉆點漆等常見問題的解答集合——東莞市柏銳智能科技有限公司
在現今社會上，可以說點膠點鉆在各行業都有所涉及，是一款工業基本機器。點膠機（點膠機）是一款專門對流體進行控制的自動化設備，它可以通過設定內部程序，自主對產品進行點膠、涂覆、灌封等操作?，F(xiàn)在柏銳據灌膠、點膠機、點鉆機的常見問題，對大家進行解答。
點膠機（點膠機）問題：
1. 你們的點膠機怎么樣？
答：我們柏銳從事點膠行業已有12年的歷史，在點膠技術上已經十分成熟。我們的最新產品全自動視覺點膠機（全自動視覺點膠機），可以采用“視覺”功能，精準定位產品位置，在精度、效率上有極大的優勢。
2. 普通點膠機跟視覺點膠機有什么區別嗎？
答：普通點膠機的話，需要做模具去固定產品位置，視覺點膠機可以任意擺放產品，而且兩者在精度上有很大的差距。如果你的產品點膠需要精度高的話，那還是推薦你選用視覺點膠機。
3. 單工位跟雙工位的視覺點膠機又有什么區別？
答：單工位的話，就只有一個鏡頭，只能做完再重新放產品。雙工位有兩個鏡頭兩個工作平臺，可以左右不停的工作，效率是單工位的一倍！
點鉆機（點鑽機）問題：
1. 我想在頭飾品上點鉆，你們可以做嗎？
答：我們的點鉆機可以點頭飾，你的點鉆面是平面還是弧面？翻沙件還是壓鑄件？
2. 你們可以點多小的鉆？
答：我們的點鉆針頭的規格一般來說都比較小，在14G-35G之間。但是翻沙件的鉆小于7號不能點，因?yàn)榉臣粯?biāo)準。壓鑄件5號以下不點，鉆太小，效率慢。
3. 你這個點鉆的頭有多少支，效率如何？
答：我們柏銳點鉆機的點膠槍是配備2支，點鉆頭按照實際需求可以配置在6-12支以內。
灌膠機（灌膠機）問題：
1.我使用的是AB膠，灌膠機有什么選擇？
答：有很多種選擇，你的膠水里是否有填充物，多久時間會初步固化？
2.灌膠機能有多精準？
答：一般來說可以精確到0.01克。但精度根據你的實際需求來調。你點一份產品需要多少膠水？平常你一天的產量是多少，膠水的比例是多少？
1. 一分鐘的效率怎么樣？膠水會有滴漏現象嗎？
答：正常來說一分鐘能點膠200次，但是要根據產品來進行具體的測試。膠水滴漏95%是因?yàn)獒橆^口徑太小所導致的。所以選擇大口徑的針頭，或者錐形斜式針頭可以避免這個問題。
以上就是我司根據近年來客戶的問題，所做的一些羅列。在點膠上，柏銳已有12年的歷史，我們立志為客人提供最好最實惠的產品，共同發展，攜手共贏！
In today's society, it can be said that plastic dot drilling is involved in various industries and is an industrial basic machine. Dispenser (dispenser) is an automatic device for controlling fluids. It can set the internal program to dispense, coat and pot seal the product. Now, Bai Rui answers the common problems of glue filling, screw machine, dispensing machine and point drilling machine.
Dispenser (dispenser) problem:
1. How about your dispenser?
A: We have been engaged in the dispensing industry for 12 years and are very mature in dispensing technology. Our latest product automatic visual dispensing machine (automatic visual dispensing machine) can use the "visual" function to accurately position the product, which has great advantages in precision and efficiency.
2. What is the difference between a normal dispenser and a visual dispenser?
A: If you use a normal dispenser, you need to make a mold to fix the product position. The visual dispenser can place the product at will, and there is a big difference in accuracy between the two. If your product needs high precision, it is recommended that you use a visual dispenser.
3. What is the difference between a single-station and a dual-station visual dispenser?
A: If there is a single station, there is only one lens, which can only be finished and then re-released. The double-station has two lenses and two working platforms, which can work around the clock, and the efficiency is double that of the single-station!
Point rig (point rig) problem:
1. I want to drill on the head ornaments. Can you do it?
A: Our point rig can nod the head, is your point drill surface flat or curved? Turning sand or die casting?
2. How many small drills can you order?
A: The specifications of our drill bits are generally small, between 14G and 35G. However, the drill of the sand-cutting piece is less than the number 7 and cannot be clicked because the sand-drawing piece is not standard. The die casting is not below the 5th, the drill is too small and the efficiency is slow.
3. How many heads do you drill at this point, and how efficient?
A: The dispensing gun of our Bai Rui point rig is equipped with 2 sets, and the point drill can be configured within 6-12 pieces according to actual needs.
Glue filling machine (filling machine) problem:
1. I am using AB glue. What is the choice of glue filling machine?
A: There are many options. Is there any filler in your glue? How long will it be initially cured?
2. How accurate is the glue filling machine?
A: Generally speaking, it can be accurate to 0.01 grams. But the accuracy is adjusted according to your actual needs. How much glue do you need to order a product? What is the daily output of your day, and what is the proportion of glue?
1. How is the efficiency of one minute? Does the glue leak?
A: Normally, you can dispense 200 times in one minute, but you should carry out specific tests according to the product. 95% of the glue droplet leakage is caused by the needle diameter being too small. So choose a large diameter needle, or a tapered oblique needle to avoid this problem.
The above is some of the items that our company has made according to the problems of customers in recent years. On the dispensing, Bai Rui has a history of 12 years, we are determined to provide customers with the best and most affordable products, and common development, and work together to win!
