成 人国产在线观看不卡片,free性欧美,人人妻人人澡人人爽秒播,脱裤吧AV导航

點鉆機(點鑽機)的壓力桶有什么特別？氣動型壓力桶跟真空壓力桶用于哪里？

點膠機壓力桶

為了能讓點膠機 點鉆機（點膠機 點鑽機）進行運作，一般來說都想要給它配備一個壓力桶。因?yàn)楦餍袠I(yè)想要的材料不同，壓力桶的性質也分了很多種類。

In order to allow the dispenser to operate the drill, it is generally desirable to equip it with a pressure tank. Because of the different materials that each industry wants, the nature of pressure barrels is also divided into many categories.

但是從作用上區分，主要分為涂料壓力桶和凈水器壓力桶。涂料壓力桶，主要用于噴漆工藝，因?yàn)橹饕蓺鈩?dòng)馬達運作，故又稱為氣動壓力桶。而凈水器壓力桶主要用于閉式水循環系統中，起到了平衡水量及壓力的作用。

However, from the perspective of function, it is mainly divided into paint pressure tank and water purifier pressure tank. The paint pressure tank is mainly used for the painting process. Because it is mainly operated by a pneumatic motor, it is also called a pneumatic pressure tank. The water purifier pressure tank is mainly used in the closed water circulation system, which plays a role in balancing the water volume and pressure.

全自動點鉆機

根據不同點鉆機所使用的膠水不同，要挑選不同壓力桶類型。不同的膠水，因?yàn)槠涮赜械男再|(zhì)，要用不同的壓力桶來進行壓載。例如厭氧膠、硅膠、油漆等，要使用不同的壓力桶類型。厭氧膠不能使用真空壓力桶，需要使用氣動型壓力桶，硅膠則使用下漏式壓力桶，而油漆則使用平常類型的壓力桶，要使用壓力桶，首先要知道哪種點膠壓力桶能夠使用哪種膠水，這樣才不會導致問題的發生。

Depending on the glue used in the different rigs, different pressure tank types should be selected. Different glues, because of their unique properties, use different pressure barrels for ballasting. For example, anaerobic adhesives, silicones, paints, etc., use different pressure tank types. Anaerobic glue can't use vacuum pressure tank, need to use pneumatic pressure bucket, silica gel uses down leak pressure bucket, and paint uses normal type pressure bucket. To use pressure bucket, firstly know which dispensing pressure bucket can Which glue to use so that it does not cause problems.

點膠機

使用點鉆機壓力桶的時候，要先將裝置連接好，把膠水倒進去，在開啟氣壓時，注意不能一下子開大氣壓，而是從小調大，防止膠水運輸過快，產生斷裂，所以要根據要求進行操作，這才是最終的壓力桶使用方法。

When using the point rig pressure bucket, first connect the device and pour the glue into it. When the air pressure is turned on, be careful not to open the atmospheric pressure at once, but adjust it from small to large, to prevent the glue from being transported too fast and break, so it is necessary to The operation is required, and this is the final method of using the pressure tank.