-
十余年實力沉淀 專注流體設備主營
視覺點膠機
食品裱花機
視覺點鉆機
視覺點漆機
視覺點膠機
食品裱花機
視覺點鉆機
視覺點漆機
灌膠機l自動灌膠機l氣壓式AB雙液點膠機的批發/采購注意事項
全自動灌膠機產品
灌膠機（灌膠機）顧名思義就是將膠水按指定的量，灌到產品表面，或者內部，可以起到灌封、黏貼、絕緣、防潮、點滴等作用。目前來說，灌膠機主要用于LED產品灌膠、LED球泡燈、LED投光燈、各種水鉆，水晶相冊，標牌之類的工藝品灌膠、電源控制板，傳感器，變壓器，互感器，電子線圈等。
As the name implies, the glue filling machine can fill the surface of the product according to the specified amount, or it can play the role of potting, pasting, insulating, moisture-proof and dripping. At present, the glue filling machine is mainly used for LED product glue filling, LED bulb light, LED flood light, various rhinestones, crystal photo albums, handicrafts and other handicraft glue, power control board, sensors, transformers, transformers. , electronic coils, etc.
目前自動灌膠機（自動灌膠機）有著高速、穩定、智能的特點，可以自動上下料，精準控制灌膠量，可以控制吐出量和重量混合比例的誤差不超過1%，不會因?yàn)槟z水的性質影響出膠的精度，保障膠水混合均勻，真空處理，不產生氣泡。使用自動灌膠機能節省大量的人力物力，提升產品的質量，已經是各行業的必備工具。
At present, the automatic glue filling machine has the characteristics of high speed, stability and intelligence. It can automatically load and unload, accurately control the amount of glue filling, and can control the error of mixing amount and weight mixing ratio to less than 1%, and will not affect the glue due to the nature of the glue. Accuracy, ensuring that the glue is evenly mixed, vacuum treated, and no bubbles are generated. The use of automatic glue filling machine can save a lot of manpower and material resources and improve the quality of products, which is already an indispensable tool for various industries.
那么在選購灌膠機（選購灌膠機）時，一般來說，要注意下面幾個事項：
Then, when purchasing a glue filling machine, in general, pay attention to the following items:
1. 首先先了解自己要選用什么樣的膠水，是單組分還是雙組份膠水，然后膠水的比例，密度、體積、固化時間是怎么樣的？
1. First, first understand what kind of glue you want to use. Is it a one-component or two-component glue? Then what is the ratio, density, volume and curing time of the glue?
2、對灌膠的精度有什么要求，以及用膠量，灌膠機選用哪種款式，還有灌膠是為了達到什么目的（灌封？黏貼？絕緣？防潮？點滴？）
2. What are the requirements for the precision of the glue filling, as well as the amount of glue used, which type of potting machine is used, and what kind of filling is used for the purpose of filling (sealing? pasting? insulation? moisture proof? drip?)
